NewFrigidaire ice maker. No water

[blms]

I just installed a new Frigidaire ice maker. I ran all the tests on the old one but had no luck. The solanoids for the drinking water and water for the ice are both working. I am getting good water flow out the water in the door but not to the icemaker. I cycled the new icemaker but it still has no water. It's been about 6 hours since the install and the inside temp is 13 degrees.Any suggestions?

[DIY Guy]

First off, check the fill tube which hangs right above the ice cube mold. If it is plugged with ice, that would do it.

Another thing to try is to pour some water into the ice mold and just make sure it does cycle properly. You'll know if it pushes the ice out to the ice bin.

[blms]

Thanks , the fill tube is clear and I just filled the tray manually.