PDA

View Full Version : Kenmore Refrigerator


klavier1
02-19-2009, 09:51 AM
Hello,
I have a Kenmore Refrigerator, 7 years old.
Model#105.71182107
I have water in the bottom of the refrigerator.
I know it is a plugged drain tube.
There is a tray attached to the bottome of the freezer and it looks like I have to take that out and the back of the freezer panel.
I have an ice maker in there also.
How do I disconnect the ice maker to take the back panel off to get to the drain?
Thanks,
klavier1

Dan O.
02-19-2009, 07:46 PM
Kenmore Refrigerator Model # 105.71182107
That model should probably read 10[SIZE=3]6[/SIZE]...

There is a tray attached to the bottome of the freezer and it looks like I have to take that out and the back of the freezer panel.
Most often only the freezer back panel needs to be removed to access the evaporator (cooling coil) drain beneath it, not the freezer floor panel.


How do I disconnect the icemaker to take the back panel off
Icemakers often just hang from 2 screws on the freezer wall just above it. Its wire harness should unplug from either the icemaker or the freezer wall.

JMO

Dan O.
www.Appliance411.com
The Appliance Information Site (http://www.appliance411.com/parts/?ref411=Kenmore+Fridge)
=D~~~~~~